This problem is closed as of 28 Feb
Give me Direction
Compute the two missing bearings on the following traverse.
|
Solvers |
||||||
| S |
D | B |
Total |
Name |
Rec'd | Comments |
| 6 | 10 | 4 |
20 |
Dave Tlusty | 3 Jan | Correct bearings; Dave loves his PacSoft. |
| 6 | 8 | 5+3 | 22 | Ben Larson | 9 Jan | Manual comps with CAD check to get correct directions. |
| 6 | 6 | 5+3 | 20 | Richard Stenzel |
13 Jan | Richard also arrived at the correct directions using manual comps and a CAD check. |
| 4 | 4 |
5 | 13 | Matt Huddelson |
31 Jan | Matt is with the Math Dept at Wash State Univ. Rounding in comps left him 2 minutes off. |
| 4 | 2 |
4 | 10 | Bill Karpen |
2 Feb |
Bill used a trial and error CAD approach which got him within 15" on one bearing and 35" on the other. |
| 6 | 2 |
4 | 12 | Kong Perales | 2 Feb | Kong used Traverse PC software to correctly determine the directions. |
| 6 | 2 | 2 | 10 | Chet Nowaczyk |
10 Feb |
Chet resorted to his "old PC 1600 and a protractor" to scale and trial-and-error compute the correct bearings. |
